|
|
The vibratory feeder supplied by us are categorized in following parts:
Elector Magnetic Type Feeder The electro magnet powered vibrator feeder developed by us contains high frequency reciprocating machine of light duty, capable enough for conveying bulk material from storage to processing or between processes at continuous controlled rate of flow. Vibrating feeders developed by us are used in processing industries for handling any type of material like hot, damp, lumpy, dusty or abrasive for various functions like flow of material from storage, proportioning and blending, packaging, mixing, weighing, sprinkling and batching.
The vibrating feeders are available along with base mounted, over hanging or combined single magnet drive or with twin, dual or dual twin magnet drives or with multiple drives for serving as vibrating conveyors.These feeders have tray mounted on the drive units that is located beneath the tray consisting of two sets, leaf springs connected to the mounting bracket, an electromagnet with armature and solid cast iron base. When magnetic coil of feeders is energized it gives horizontal vibrations to the tray, which ensures free, smooth, uniform, volumetric flow to the material that is fully variable from dribble to surge by externally step less with the help of a knob provided in the control panel. The vibratory feeders we supply are available in variety of trough size and shapes as per IS: 8723 – 1978. These feeders are supplied through half – wave rectifier resulting into 3000 vibrations per minute at 50 Hz. The amplitude of vibrations can vary to the feed rate externally with the help of variac provided in control panel. As there is no moving mechanical parts inside power unit such as gears, motors, eccentric weights, chains and bearing so it is absolutely maintenance free and no down time for process industries. The vibratory tray is heavily fabricated duly stiffened with angles. Wear resistance plate is also provided for varying abrasive materials in the tray that is made for individuals requirements. The best part is that it can be made dust tight. System is fitted with powerful electromagnetic coils, made from double fibreglass covered copper wire suitable for class H – insulation for excellent result. The coil is moulded in specially formulated resin to withstand any type of atmospheric pressure.
Standard Sizes
Table
Electro Mechanical Feeders The heavy-duty motor powered electro mechanical feeder high frequency reciprocating machine of heavy duty, capable of conveying bulk material from storage to processing or between processes at a continuous controlled rate of flow. These vibrating feeders are used in processing industries for handling every kind of material such as hot, damp, lumpy, dusty or abrasive for various functions with flow of material from storage, proportioning of blending, packaging, mixing, weighing, sprinkling, batching, screening, scalping, crushing, washing, drying, heating, cooling, dusting and spreading. Heavy-duty vibrating feeders are accessible with base mounted, over hanging or combined single motor drive or with twin dual or twin motor drives or with multiple drives for serving as vibrating conveyors. These feeders have tray mounted on the drive units, located beneath the tray. Vibratory motors are used for vibro feeders that is totally enclosed along with 3 phase squirrel cage induction motors with adjustable, eccentric weights mounted at both the ends of shaft, to set up vibrations during rotation. The design of shaft and selection of bearings has been carefully done for high performance and heavy radial loads. Two identical motors mounted parallel to each other on a right and left which is free to move in all direction, produce linear vibrations, when connected for contra rotation. This principle is adopted for handling large bulky material in large feeders.
For further information Email as bce.magvib@gmail.com
|
|
|
|
|